How to Make Cutest Bird Baths For Centerpieces or Decor
With simple steps and endless customization options, you’ll love upcycling cast-offs into charming bird baths for centerpieces and more.
Transform your garden party into a whimsical wonderland with these captivating centerpieces that resemble concrete birdbaths. By upcycling thrift store finds, you can create stunning centerpieces that are both unique and budget-friendly.
Welcome all you DIY Wedding magazine readers who have hopped over here to see how I craft these faux concrete birdbaths for your garden-themed shower, rehearsal dinner, bridesmaid brunch or reception centerpieces.
Personally, I jump at the opportunity to eat outdoors. Somehow al fresco elevates every gathering โ even if itโs a gathering of one with her cup of caffeine and the morning news. The patio beats the kitchen table every time!
It’s no wonder I’m attracted to the look of worn and weathered concrete statuary, especially for event or party decorating.

So what would be better for garden party centerpieces than tabletop โconcreteโ birdbaths?
But they would also be great for outdoor wedding receptions, birthday parties, anniversaries, showers and so many other outdoor themed events!
Hard to believe this is an inexpensive bird bath made from repurposed materials found at thrift shops and your own stash.
NOTE: Your DIY bird bath may look like a concrete bird bath, but keep I’m mind they are not intended for extended time outdoors.
Mine have held up beautifully for several years on our covered porch during the frost-free months. But I do not let water sit in them and I don’t let them freeze.
TABLE OF CONTENTS:
- Materials and Supplies-โ
- Step 1) Gather Your โArmatureโ-
- Step 2) Time to Assemble-
- Step 3) Sculpting Your Bird Bath-
- Step 4) Add Additional Details, optional-
- Step 5) 2nd Verse โ Same as the First-
- Step 6) Add the Aging or Patina-
- Step 7) Add Sealer, optional-
- Where and When-
- Ideas to Style Them for Centerpieces-
Let’s Make Easy Faux Concrete Bird Baths
Materials and Supplies–โ

- Old dishes, old serving bowl, old candlestick, glass lid, shallow bowl, small old lamp base
- Small bird statues, optional
- Cheap Mardi gras beads or string of glass beads, optional
- Joint compound
- Craft paint
- Putty knife or craft stick
- Adhesive, I used E-6000
- Fine sandpaper, optional
- Matte sealer, optional
- Disposable bowl for mixing, with a lid if you have it
- Disposable cup
- Clean water
- Craft paint brush
- Old t-shirt rag or paper towels
Step 1) Gather Your โArmatureโ-

To craft your own unique bird bath, start by gathering odd pieces to form the structure.
Keep in mind you are only looking at the shape, the form, the scale. Donโt be put off by the truly atrocious colors, finishes or surface designs. Feel free to mix different colors, as they will all be unified in the end. Which means lots of different options.
Mine through your cabinets, take a field trip through your local thrift stores, dollar stores or yard sales. If you find a statue of some feathered friends, grab it too. It’ll make a great addition. Because what’s a bird bath without a bird, right?
Each birdbath will need at least 2 items. First, a large plate, pasta bowl or small platter for the water basin.
Then for the pedestal, a squatty vase, a hefty candle holder, an small old lamp base, a stemmed dessert glass are all good options.
If the footprint of the pedestal needs more width for stability or a bit more height, I like to add a salad plate or saucer upside down, like the one on the left and in the center.
A solitary bird statue and a short vase with a bird attached that will hold some fresh cut flowers in water. Have fun with this!
I left one without wildlife because its arrangement will include a table number and a candle. Add in a bird and thatโs a mighty busy bath!
Play with your cache of quirky, neglected, worn โtreasuresโ until you find the ideal combination of forms.
A quick pause in the crafting while an ask, Does this sound like a project you might enjoy? How about more? It’s easy when you’re a subscriber. Please consider subscribing now:
Many thanks!!! Now back to our birdbaths:
Step 2) Time to Assemble-

Break out a super strong adhesive โ I used E-6000.
The only trick here is to make sure everything is centered and level.
Step 3) Sculpting Your Bird Bath-
Once your glue is dry, itโs time for the fun. Bring on the joint compound!โ
Now it’s time to “sculpt” your birdbath. Joint compound, a versatile patching material, will be your sculpting medium.
Yes, you read that right โ joint compound. Itโs my secret go-to!
My first joint compound (JC) project was this “cast concrete” fireplace and flue. Can you believe that? And this mirror on our patio. And these “concrete” eggs. And these large artisan pots. Oh, and even pinecones.
Yes, you can guess it’s one of my favorite mediums.
Transfer a generous amount of JC to your disposable container.
Stir the joint compound to get a smooth and even consistency. If it seems too dry, add some water. You want it the consistency of frosting. And this is very similar to, but way more forgiving than frosting a cake. Just donโt lick the spoon.โ
PRO TIP: Two steps in one. If you want a deeper color, more grey, more taupe, more moss, more brown, etc. Use craft paint to help thin it a bit.


When your JC is colored and thinned (if needed), start by piling on a good helping of joint compound (JC).
Then with your fingers, work it into all the nooks and crannies. Lather this beginning layer on all surfaces.
PRO TIP: But just like with painting, two thin coats is better than one heavy coat.
Donโt obsess over this first coat. You will smooth it out and work on the texture later. The goal here is a good somewhat consistent base layer.
Step 4) Add Additional Details, optional-
Stand back and take a good look at your birdbaths. If at this point you decide, your birdbath needs a bit more, it can still be added.


I decided this pedestal was a bit too plain. So I added some mardi gras beads for a bit more detail and texture.
It was simple enough to do, I pushed the beads into the wet JC to secure them in place. Then I gave them an initial covering of JC.

The basin was a bit too flat, so I adhered larger Mardi gras beads to the top of the edge with a thick band of JC to create an awesome scallop and a bit more depth.
Yes, it is a great idea to add these details with the adhesive before starting with the JC, but I want you to see that you can add as you go if you need to.
Be sure to get the underside of the bird bath bowl too.
Let it dry a bit (an hour or two), or even overnight and then dip your fingers (or a small soft rag or pad works here too) in a bowl of water and gently rub to smooth out your semi-dry finish a bit.
PRO TIP: While your birdbath is drying, keep your bowl of JC covered and it should be ready for the next step.
Step 5) 2nd Verse โ Same as the First-
Let it dry a bit more or for several days if your schedule requires, and you are ready to add a second coat of joint compound.


This layer should be enough to give you complete coverage and polish the texture. If you were a bit thin in your application, and you have the time, there is nothing wrong with a third thin layer.

Again, wet fingers, or a damp smooth rag rubbed over the almost dry surface will smooth it out further. Once it is dry, fine grit sandpaper can also be used if you have a particularly troublesome spot.
This whole process is very forgiving, so just get in there and play!
Step 6) Add the Aging or Patina-
Once youโre happy with the texture and itโs dry, itโs time to add the aging.
Watered down paint applied quickly and rather sloppily is it.

I used cheap black craft paint thinned with water.
Make sure all areas are covered and let it pool a bit in the nooks and grannies.
Keep a damp rag or paper towel handy and wipe as you go on the raised areas lightening the raised areas and leaving the recessed areas darker.
You can go as light or dark as you like. Not sure how dark you want? Then start light, you can build up the color.
When you’re making your bird baths, it might be a good idea to make a sample one to test different colors.
Step 7) Add Sealer, optional–
As I stated before, we have used our birdbaths on our covered porch for several seasons without issue. And I never sealed them. But it certainly wouldn’t hurt anything. I suggest a matte sealer.
Ideas to Use Your Birdbath Beyond a Garden Party
Oh the possibilities!
Where and When-
Isn’t this the cutest tabletop diy birdbath idea? But, they don’t have to sit on a table, a hanging bird bath would also be really sweet.
These are such a fun and inexpensive project, why not make three of different heights for the perfect way to decorate a buffet table, or the gift table at a shower or by the guest book at a reception.
A friend and I actually made 24 of them for our church’s Mardi Gras themed dinner and dance.
With this craft, the whole family can get in on the action! Wouldn’t this make a great gift from tweens to their Grandma?
And who says you have to confine them to outdoor spaces. If you have a garden-themed bedroom, your homemade bird bath could serve as a jewelry dish. Or maybe one could serve to to coral your clippers and seed packets in your greenhouse.
Ideas to Style Them for Centerpieces-

Give your simple tabletop bird bath a contemporary twist with faux succulents, florist moss and a tuft of wispy grass!

Or, for nostalgic charm, how about with a candle and a table number in homespun garden clippings?

Maybe a traditional style with a monotone flavor of all shades of green?
The best part is, you are the designer! Grab your supplies and a pile of junk, uhhh tired treasures, get messy, and create something fabulous!
Be sure to Pin It to Remember It (maybe even on multiple boards ๐):

I hope this post fueled your creative thinking.
Let me know what youโve come up with or if I can help you with any part of the process! Iโd love to see pictures of your unique “concrete” bird bath projects.

So, I have been online shopping for centerpieces for my daughter’s first birthday party and I could not believe how expensive the items were going to be. I started to research birdbaths and there you were. Amazing craft project. I can go to a thrift shop and spend 3 dollars on each centerpiece with just random plates. I’m so excited to get started. Thank you so much for this idea. It’s going to save me so much money!!!!
Thank you,
Wanda
Wanda, do you have pictures to share?
This is such a nice idea. I’ve made a similar one but minus the joint compound so I had to be careful and match up the pieces in color. This has such a cohesive, natural and aged look and you don’t have to be concerned as you said with the colors of your pieces AND allows you to add elements such as the beads to jazz it up. I can’t wait to try it. Thanks for sharing.
These are SO fabulous! Could you please give a bit more specific information regarding the type and color(s) of paint you used? Thank You!
Thanks Shelley! I love how they turned out, and they really are fun, messy and very forgiving. As for paint color, I just used a very, very watered down black craft paint I had in my stash.
What a fun idea! You are brilliant and I need to make these!
Have a wonderful day!
karianne
I LOVE THIS IDEA!…any thoughts on making a large one.I would like to try and make a regular size one for my flower garden…any suggestions appreciated!
Debbie from Halifax Nova Scotia Canada
Thanks for the idea love, Debbie!
I don’t think the joint compound would hold up outdoors in all kinds of weather. I am doing a small trial using exterior grade grout. I figured it should work since this is what masons use on exterior walls and such. My first attempt was a fail in that I was adhering it to a plastic planter that had an interesting shape but a terrible, cheap finish. It cracked and fell off after maybe two weeks. Two lessons (at least): 1)the finish on the plastic was rather shiny — I should have roughed it up and primed it. 2) the plastic would move and bend as I lifted it and moved it around and that’s when it cracked — so don’t use thin-walled plastic items as my base.
Hope that gives you a bit of insight and saves you a bit on the trial and error side of crafting/making.
Please share how it goes. We’d all love to hear — and maybe some pics too.
Hello
First may I say I LOVE this idea !!!!
Gorgeous ?!!!
But little confused …. is joint compound the same thing as sheet rock mud ?
Before I go crazy making these
Thank you
Hi Kerrie,
Yes joint compound, drywall mud and “mud” are all the same thing. I would think Sheet rock mud is in there too. Spackle is not. I think spackle is more elasticy (technical term) as it’s intended for repair small spots.
Enjoy! and please share your pics. If you’re on instagram please tag @southhousedesigns and use #southhousedesigns so I can find them and possibly feature them.
THANK YOU
I thought it was but just wanted to make sure !!
Good morning!
Did you glue all you pieces together before applying the joint compound? Also if using for outside will it need a coating of varathane?
Hi Shirley,
Yes, glue all your pieces first. Once this armature is dry, then you proceed with the joint compound.
These are intended as centerpieces or decor pieces. I do not know that they would hold up for a whole season fully exposed to the elements. Mine have last several season on a screened porch. Idid not coat them because I did not want any shine as I was going for the aged concrete look.
Good morning!
Did you glue all you pieces together before applying the joint compound? Also if using for outside will it need a coating of varathane?
Hi Shirley,
Yes, glue all your pieces first. Once this armature is dry, then you proceed with the joint compound.
These are intended as centerpieces or decor pieces. I do not know that they would hold up for a whole season fully exposed to the elements. Mine have last several season on a screened porch. Idid not coat them because I did not want any shine as I was going for the aged concrete look.
[…] ANN’S FEATURE – Diane of South House Designs […]
[…] ANN’S FEATURE – Diane of South House Designs […]
[…] while your crock pot is working away, maybe you’d like to make a tabletop “concrete” birdbath centerpiece or maybe make a new […]